Phoenix Service Software 2011

[joneywalker4u]

First thing first - New and inexperienced users stay away because it will harm you more than doing good.

======================================== ===================================
joneywalker4u - Phoenix Service Software 2011.02.000.44842
======================================== ===================================

======================================== ===================================
Fresh Install
======================================== ===================================
1) Install msxml6_x86.msi (ignore if already installed on your system)
2) Install vcredist_x86.exe (ignore if already installed on your system)
3) Install Nokia_Connectivity_Cable_Driver.msi
4) Install Nokia_Flashing_Cable_Driver.msi
5) Install Nokia_Service_Tool_Drivers.msi
6) Install FLS-4Drv1.34.exe (Install this only if you are facing problem otherwise)
7) Install Phoenix_Service_Software.msi (Version 2009 )

This is a fixed release and dongle fix patch may not be required.
8. Fix Dongle by installing Phoenix_2006_2009_fixer.exe


======================================== ===================================
Upgrade
======================================== ===================================
1) Install FLS-4Drv1.34.exe (only if step 2 shows error)
2) Install Phoenix_Service_Software.msi (newer Version 2009 )
3) Fix Dongle by installing Phoenix_2006_2008_fixer.exe (only if it asks for dongle)


======================================== ===================================
Using Phoenix - quick walk through
======================================== ===================================
1) Run the program
2) Create User if it asks to.
3) Connection, select USB and apply it.
- Supports dead phones
- firmware downgrade (you need security card for that).
4) Connect phone, select scan product.
5) Get flashing!

======================================== ===================================
Full Visual guide is available here
======================================== ===================================
http://www.4shared.com/file/51013479...ing_guide.html



======================================== ===================================
Troubleshooting
======================================== ===================================
If you are having trouble installing phoenix fresh/upgrade
Because you have pc suite, nokia software updater etc installed or any other conflict

Do these steps and goto top^ Fresh install
======================================== ===================================
System Preparation
======================================== ===================================
- Uninstall Nokia PC Suite, Nokia Software Updater and any other Nokia Stuff.
- Uninstall Nokia Drivers like connectivity, flash cable, modem driver etc.
- Reboot PC.
- Clean temporary files and registry using your favourite software, if you don't have one get one ccleaner.com
- Reboot PC.


One phoenix is installed, you can install Nokia stuff also.

======================================== ===================================
Nokia 5800 Normal flash log.
======================================== ===================================
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Asic CMT: Verifying communication to device...
Getting product info...
Loading image files...
AdlServer: Rebooting...
Closing connection
Opening RAW connection... BUS_NAME:USB PORT_ID:4&15ABCB53&0&1 PROTOCOL:RAW
Failed to open RAW connection
Failed to open RAW connection! Reopening RAW connection...
RAW connection successfully opened!
ROM Boot Drivers loaded. Starting flashing...
Connection opened to BootCode successfully
Failed to set device inforamtion!
Opening RAW connection...
RAW connection successfully opened!
Waiting for USB device...
--- Press phone's power button! ---
Connection opened to BootCode successfully
First wait command succeeded.
Flashing Secondary boot code: 15040 Bytes
Secondary boot loaded
Skipping USB handshake...
Flashing Update Server Data: 2426489 Bytes
Flashing UPS data: 0%
Flashing UPS data: 28%
Flashing UPS data: 50%
Flashing UPS data: 71%
Flashing UPS data: 93%
Flashing UPS data: 100%
Flashing UPS data: 100%
Update server loaded
Waiting for Update Server to boot...
Restoring normal connection...
Asic CMT: Verifying communication to device...
Asic CMT: UA Protocol 1.0 detected.
Initializing Update Server....
Asic CMT: Verifying communication to device...
Asic CMT: UA Protocol 1.0 detected.
Loading image files...
Loading image files...
Asic CMT: Selecting programming blocks...
Asic CMT: Start programming 117411 KB...
Asic CMT: Partitioning RM-356_20.0.012_prd.core.C00
Asic CMT: Partitioning area 1...
Asic CMT: Erasing RM-356_20.0.012_prd.core.C00
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing area 4...
Asic CMT: Erasing area 5...
Asic CMT: Erasing partition 0x0000000A...
Asic CMT: Erasing RM-356_20.0.012_prd.rofs2.V19
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-356_20.0.012_C01_prd.rofs3.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM356_20.0.012_002_U206.uda.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Programming RM-356_20.0.012_prd.core.C00
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming 8%
Asic CMT: Programming 10%
Asic CMT: Programming 12%
Asic CMT: Programming 14%
Asic CMT: Programming 16%
Asic CMT: Programming 18%
Asic CMT: Programming 20%
Asic CMT: Programming 22%
Asic CMT: Programming 24%
Asic CMT: Programming 26%
Asic CMT: Programming 28%
Asic CMT: Programming 30%
Asic CMT: Programming 32%
Asic CMT: Programming 34%
Asic CMT: Programming 36%
Asic CMT: Programming 38%
Asic CMT: Programming 40%
Asic CMT: Programming 42%
Asic CMT: Programming 44%
Asic CMT: Programming 46%
Asic CMT: Programming 48%
Asic CMT: Programming 50%
Asic CMT: Programming 52%
Asic CMT: Programming 54%
Asic CMT: Programming 56%
Asic CMT: Programming 58%
Asic CMT: Programming 60%
Asic CMT: Programming 62%
Asic CMT: Programming 64%
Asic CMT: Programming 66%
Asic CMT: Programming 68%
Asic CMT: Programming 70%
Asic CMT: Programming 72%
Asic CMT: Programming 74%
Asic CMT: Programming 76%
Asic CMT: Programming 78%
Asic CMT: Programming RM-356_20.0.012_prd.rofs2.V19
Asic CMT: Programming 80%
Asic CMT: Programming 82%
Asic CMT: Programming 84%
Asic CMT: Programming 86%
Asic CMT: Programming 88%
Asic CMT: Programming 90%
Asic CMT: Programming 92%
Asic CMT: Programming 94%
Asic CMT: Programming RM-356_20.0.012_C01_prd.rofs3.fpsx
Asic CMT: Programming RM356_20.0.012_002_U206.uda.fpsx
Asic CMT: Programming 96%
Asic CMT: Programming 98%
Asic CMT: Programming 100%
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
BB5 USB Flashing succeeded
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Doing factorysets
Factorysets complete
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.1
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 1 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Product flashing succeeded.

======================================== ===================================

[URL="http://www.4shared.com/dir/9Aa-WSim/Phoenix_Service_Software.html[/URL]

======================================== ===================================

======================================== ===================================
To download firmware files from nokia
======================================== ===================================

Run phoenix > goto Tools > Image file download

Enter your product code.


``````````````````````````````````````
NOTE
``````````````````````````````````````
For those - stop blaming me! and enjoy this $hit.

Release 12 March, 2011.


Please click "Thanks" button.

[navxp]

1) Install msxml6_x86.msi
2) Install vcredist_x86.exe
3) Install Nokia_Connectivity_Cable_Driver.msi
4) Install Nokia_Flashing_Cable_Driver.msi
5) Install Nokia_Service_Tool_Drivers.msi
6) Install Phoenix_Service_Software.msi (Version 2008 )
Apparently it should ask for dongle (depending upon the version you downloaded), if it does use old dongle . I had one, it didn't ask while installation. Its MD5 529007e5fcca7094df2cac66ccd7a582
7) Fix Dongle by installing Phoenix_2006_2008_fixer.exe

do i need to dwnd all tese softwares and then install them or else it is included in the file wic i dwndedand also can i flash my dead n95 8gb

[joneywalker4u]

All files are included in the pack, yes you will be able to flash dead Nokia 95 8gb too. But you will need firmware files, search for them on google. If they are on your HDD, then point phoenix to them.

[navxp]

i did not find firmware files in google, plz can any one in the forum tell me wer exactly i can find the files,or any method to get the files

[joneywalker4u]

i did not find firmware files in google, plz can any one in the forum tell me wer exactly i can find the files,or any method to get the files

http://rapidshare.com/files/83153592..._v3.0.rar.html

[navxp]

thanks a thousand times, now ill try to get my n95-8gb in working,ill contact u if i have any doubts

also i have a n82 wic is working fine and ive noticed tat the firmware files for it r ter in c:\document&settings\allusers\nokia\serv icelayer........,do i need to copy them for future use,like suppose my n82 dies or like any other matter,so tat i can get it back to working

[joneywalker4u]

Yes you can do that. save them for such a case.
Note one thing - when you'll revive your N95 at the start cell if off and when flashing begins, after a few steps it says:
Waiting for USB device. Press phone's power button (if you start from dead terminal)

Now you must turn on the phone to continue.

[navxp]

Hope this info help you guys!

Download

Download (Rapidshare)
Username: joneywalker4u
Password: joneywalker4u

Please click "Thanks" button.

i have dwnd the firt link wic is of 113mb wic contains a singl file named phoenix2008patched.exe


now u have added another link-----download(rapidshare)
wic contains the folder,and a number of files in it,do i need to dwnd them too,or is it an alternative link from rapidshare

[joneywalker4u]

i have dwnd the firt link wic is of 113mb wic contains a singl file named phoenix2008patched.exe
now u have added another link-----download(rapidshare)
wic contains the folder,and a number of files in it,do i need to dwnd them too,or is it an alternative link from rapidshare

Rapidshare one is alternate. Go with the file you downloaded first. Both are same.

[vahid170]

Thanks a lot bro
It work very easy (firs download link -> auto install everything)
I am updating my phone
Thanks man

[skyruler101]

Thanks, Bro! this is a lot easy then old one!!

[sarunnnnn]

thank a lot
i ll test it

[l2oszi]

Thanks a lot bro

i ll test it

[spankyleo123]

Guys i dont have a Rapidshare premium account ,,,,,,,,,, but i really need those file ,,,, my phone is dying.

[joneywalker4u]

Guys i dont have a Rapidshare premium account ,,,,,,,,,, but i really need those file ,,,, my phone is dying.

Premium account is not needed