SymbianGuru GPS-Action v1.04 S^3 Anna Belle SymbianOS9.x UnSigned Cr@cKeD -By- cGiPDASymbianGuru GPS-Action v1.04 S^3 Anna Belle SymbianOS9.x UnSigned Cr@cKeD -By- cGiPDA within Symbian^3 Applications, part of the Symbian^3SymbianGuru GPS-Action v1.04 S60v3 S60v5 S^1S^3 Anna Belle SymbianOS9.x UnSigned Cr@cKeD -By- cGiPDA General information: GPS-Action software sets automatic alarms ...

[rajkumarz]

SymbianGuru GPS-Action v1.04 S60v3 S60v5 S^1S^3 Anna Belle SymbianOS9.x UnSigned Cr@cKeD -By- cGiPDA


General information:
GPS-Action software sets automatic alarms and performs different actions according to the GPS and Cell position of the mobile phone.
You can launch the application, which you have selected, launch the desired document or change the profile or a Buetooth status of your mobile phone when achieving some geographical position.
via: Imserba Smart Phones Forum & Free Download http://www.imserba.com/forum/symbianguru-gps-action-v1-04-s-3-anna-belle-symbianos9-x-unsigned-cr-cked-cgipda-t200314/#post1060228
Application may fire alarm and display a custom note as soon as you reach your destination.
All actions are performed without any user interaction, only using the location based information.
You have no GPS inside your mobile? No problem! GPS-Action works also with CellID information that is available to all devices without GPS module.
Nokia native landmarks are included automatically into the application.

New in Version 1.4:
The software is fully compatible with the latest mobile phones Symbian^3, Symbian Anna and Symbian Bella: Nokia N8-00, Nokia X7-00, Nokia C7-00, Nokia 603, Nokia E7-00, Nokia 700
All bugs were fixed

Easy to use software
GPS-Action is very easy to use. You need to undergo only three simple steps after installation:
Adjust software settings: here the main thing to adjust the way of geo-positioning: based on GPS, Cell location or both ways. Also you should define your working days and alarm sound volume here.
Create your own landmarks (if you have your Nokia landmarks already, this step can be omitted): your target places where you want the alarms to be fired and actions to be executed are called landmarks. You can define landmarks as your current place, add landmarks from ready Nokia Landmarks (for devices with built-in GPS) or define landmark coordinates manually.


Create alarms and actions schedule based on the landmarks: during this step you set type of action and alarm to be executed, as well as alarm frequency, minimal playtime, condition and corresponding landmark.
GPS and Cell ID positioning: available to all Symbian^3, Symbian Anna and Symbian Bella devices, also without GPS.
There are two types of location positioning: GPS positioning and Cell positioning. GPS positioning is very precise. It is achieved via satellite and it is available for the devices with built-in GPS or external GPS-receiver. This location type has its drawback: connection to the satellite is not possible through walls. So if you are inside, your GPS position will most probably not be retrieved.
For this case, and also for the devices without built-in GPS receiver, we have the second positioning type: location by Cells. Cells are available at all GSM operators, it is the mast where your mobile is receiving the information about the GSM network and your mobile operator. This info is available everywhere, where the GSM network is available. However, the CellID positioning is not so precise. As the GPS positioning, sometimes cells are situated far from each other, so the area for your landmark can be vast enough

Key Features:
Alarms and actions performed silently, as soon as the geographical target is achieved
Recurring alarms and actions with many scheduling conditions
Variety of actions include: change profile, change BT status, open document, launch application, launch website.
Action frequency can be restricted for the case you are approaching the same landmark more then once
Time range for the action or alarm can be restricted, you will not be bothered at night.
Two types of geo positioning: based on GPS and Cell information
Available for allSymbian^3, Symbian Anna and Symbian Bella devices, even to those without GPS receiver.
Full synchronisation with native Nokia Landmarks
Minimal alarm playtime can be set, as well as personalized alarm note
Customizable alarm sound for every single alarm.

How to save your battery life
There are two ways to save your battery life while you are using the GPS-Action software. You can select the Network Based method of positioning or use the CelId positioning in GPS-Action software settings.

Requirements:

» S60 3rd Edition Devices [Tested]
» S60 3rd Edition FP1 Devices [Tested]
» S60 3rd Edition FP2 Devices [Tested]
» S60 5th Edition Devices [Tested]
» Symbian^3 Devices / Anna / Belle [Tested]

DOWNLOAD HERE

[salahhh]

Thanks for sharing bro, but it is not really functional on my ANNA N8. The problem is that if i want to assign a gps location or if i want to update an already existing landmarks it says, gps not available, though i made sure i have all the gps functions activated from the settings. Well if i keep the landmarks as they are and decide to use it to detect my location and change to the profile i predefined, i see the gps indicator active, but there is no action taken. It keeps scanning and scanning but no action. Is there something i am missing or should i do something to fix this issue bro? any guidance?