How to change image in iphone lock.
First download these files on ur memory card. Use swiss manager to copy the new skin.mbm file located in the folder and replace them with the default skin.mbm file in ur memory card.
Memory card -D:/shared/iphonelock/skin.mbm
Thats it.. open ur iphone lock n dere u have it. Remember to close iphone lock completely before change the skin.mbm file.
UPGRADE IPHONE LOCK 0.03(2)Recommended
Attached
Improvement:
Changelog
+ Slightly modified schedule (thanks SpiceM)
+ Pofikshena button return after blockage
+ Once again changed behavior slider (decided in ini)
+ You can set the speed or even disable animation at the outlet (in ini)
+ Changed display indicator Battery
ini:
AnimOnExitSpeed = 5 - speed animation at the outlet, if 0 - then turned off altogether
SliderMoveCenterPos = 1 - Response slider position, with 1 = cents on when = 0 on the left edge, as it was in the 0.1 and 0.2 versions
HOW TO CHANGE BACKGROUND IMAGE OF IPHONELOCK
To change you're background picture scroll down to Djoka84's post n download mbmtool software and follow these instructions. Same procedure applies in changing background picture in both 0.02 version & 0.03 version.
STEP 1
-open your memory card with thru ur pc
STEP 2
-open D:/Shared/iphone and copy skin.mbm
STEP 3
-just add the wallpaper 240x320 in the skin.mbm through the mbm tool
STEP 4
-once uve open it delete the old wallpaper and place it on top of the list.
STEP 5
-save the mbm file with the same name SKIN.MBM
Note: Make all your background skin files at once so that u dont have to worry about going thru all this hassel all the time.. just place them in different folder n name the folder with ur wallpaper name so that u remember which is which and place it in ur memory card. Everytime u want to replace the skin.mbm file with ur fav wall paper u can do it with the help of Swiss manager.
ur done Be sure to thank Djoka84 for providing the application mbmtool.
Iphonelock 0.50 as of 28th april
How to change the icons notification in iPhonelock+ After blocking now returns to the same application / state that was before the lock
+ Now the screen backlight should behave normally (except backlight keys on p1/w960)
+ Displays number neprochitanyh SMS / MMS / Email (I checked only SMS / MMS, please check with the case EMail)
+ Displays missed calls, believes only missed when blocking (which was before the lock, ignores), with manual unlock - dumped.Cancelled during a blocking call is considered a missing
+ To ini parameter added HiddenTaskMode - hides application from the list of targets
+ If idleTimeOut = 0 and StartOnBackground = 1, the program works in the background and avtoblokirovka time inoperative
+ If TimeToDisplayOffAfterLock = 0, the screen is not extinguishes after the block. Now, this value must be a multiple of 10! Works not very precise, error of approximately 10 seconds smile.gif
+ To ini parameter added UsePowerSaving: 1 - using energy-saving mode, 0 - disabled energy saving
+ Added in the ini settings and ScreenActiveOnMobiReader ScreenActiveOnCorePlayer: 1 - not extinguish the screen with the active or MobiReader CorePlayer, 0 - disable this feature
+ Added in the ini settings and NotLockOnMobiReader NotLockOnCorePlayer: 1 - not to block the active MobiReader or CorePlayer, 0 - disable this feature
+ To ini parameter added LockOnlyOnStandByOrGDesk: 1 - automatically block only with the active standby or GDesk, 0 - otlyuchit this opportunity. NotLockOnCorePlayer. This option has a higher priority than NotLockOnMobiReader and NotLockOnCorePlayer.
+ To ini added Section LockedKeys - in what it described key block: 1 - block, 0 - not to block
+ To ini parameter added TurnOnDisplayOnTouch: 1 - include touching the screen with, 0 - do not include
+ To ini parameter added AutoStartOnBoot: 1 - iPhoneLock load at boot phone (works even if, in addition enabled StartOnBackground), 0 - not to download
+ To ini parameter added ShowBatteryLevel: 1 - shows the level of battery in% 0 - disabled
First u need to have mbmtool and png2bmp with you.
Step1: Open the skin_icon.mbm file in mbm tool. You will see there are icons and there masks available.
Step2: The icons being installed need to be 48x48 in size. I use Gimp software (freeware) Link given below. Open you icon in gimp and go to image n resize them to 48x48.
Step3: Open the png resized 48x48 icons in png2bmp and convert. it will automatically convert your icon into bmp along with its mask. Name them exactly the same as in skin_icon.mbm. meaning the one u are suppose to replace. E.g. 000 for the icons n 001 for the mask.. depending on which icons u are replacing , its important dat u name them exactly the same as the icons ur replacing in skin_icon.mbm.
Step4: just replace the icons in the same manna meaning icon first den its mask ..
Step5: Right click on ur new replaced icons in mbm tool and select change colors and select 24bit.. ur done save the file with the same name skin_icon.mbm n ur done replace it in ur /shared/iphonelock/
hope this is helpfulHave fun customizing.
Image: Courtesy of Ichigo581
Remove Ghost SMS
File in attachment.
IPHONE BACKGROUND IMAGES MBM FILES:
BACKGROUND 1
BACKGROUND 2
BACKGROUND 3
BACKGROUND 4
BACKGROUND 5
BACKGROUND 6
BACKGROUND 7
BACKGROUND 8
BACKGROUND 9
BACKGROUND 10
BACKGROUND 11
BACKGROUND 12
BACKGROUND 13
BACKGROUND 14
BACKGROUND 15
BACKGROUND 16
BACKGROUND 17



2Likes
LinkBack URL
About LinkBacks





Have fun customizing.


Reply With Quote




Click The Thankx Button Plz





Bookmarks